Test equipment
Propulsion and aerodynamics test equipment for engineering teams and labs that develop their own aircraft. Supplied and supported in Thailand by ICS (Tyto Robotics products).
Thrust stands (Series 1585 and Flight Stand)
Measure thrust, torque, RPM, voltage, current and efficiency of motors and propellers, from 5 to 500 kgf.
- Flight Stand: up to 1,000 Hz sampling for vibration, ESC response and motor and propeller dynamics (Flight Stand 15 and 50 Standard: 100 Hz)
- Calibrated with Tyto's method derived from ASTM E74 and E2624, with crosstalk compensation
- I/O API and full Python control; read extra sensors and CAN ESCs
Series 1585
Compact thrust stand for small drones and motors, connected over USB · 5 kgf thrust · 2 Nm torque · 50 V · 55 A
Datasheet
Flight Stand 15
Thrust stand for mid-sized UAVs; software tests up to 8 motors and propellers at once. Standard and Pro versions · 15 kgf thrust · 8 Nm torque · 30,000 RPM · 180 V · 150 A
Datasheet
Flight Stand 50
Thrust stand for medium and large UAVs, up to 8 powertrains at once. Standard and Pro versions · 50 kgf thrust · 30 Nm torque · 30,000 RPM · 180 V · 300 A
Datasheet
Flight Stand 150
Thrust stand for large drones, eVTOL and electric aircraft · 150 kgf thrust · 150 Nm torque · 16,800 RPM · 1,000 V · 500 A
Datasheet
Flight Stand 500
For very large motors and propellers · 500 kgf thrust · 1,500 Nm torque · 16,800 RPM · 1,000 V · 500 A
Datasheet
Product photos: manufacturer
Windshaper (wind tunnel alternative)
A modular wall of individually controlled fans that creates 3D wind profiles such as turbulence, gusts and wind shear. Flow speed 2–20 m/s (higher with a convergent); built to any size and shape.
- Free-flight tests in designed 3D wind flows
- Motor and propeller testing with a Series 1585 or Flight Stand
- Scale model and airfoil testing
- Each module: 9 wind pixels (18 fans), 0.243 m square; controlled with WindControl or a Python API
- Building and structural testing
- Environmental and biological testing
- Wind turbine testing
- Pollution dispersion studies
Windshaper 20 × 20 in
Fan wall 20 × 20 in; design your own 3D wind profiles.
Windshaper 30 × 60 in
Fan wall 30 × 60 in; design your own 3D wind profiles.
Windshaper 80 × 80 in
Fan wall 80 × 80 in; design your own 3D wind profiles.
Windshaper 120 × 80 in
Fan wall 120 × 80 in; design your own 3D wind profiles.
Product photos: manufacturer
Match the rig to your test programme
Tell us the motor, propeller or model size you test; an ICS engineer will recommend the model and set-up.